Cart 0

Orbit Xo

All-in-One Cellular Gateway

  • Cellular gateway 

  • Includes battery, solar panel, solar charge regulator, SD card for backup storage, all mounting hardware,

  • Includes one year of cellular service, pre-provisioned and ready to go

  • Includes one year usage of CloudInsight web-based software

Orbit XO cellular gateway

Overview

Xo is a complete monitoring station platform. It includes all hardware, software and services needed for data acquisition, cloud-based data storage, viewing and analysis. It makes any sensor data easily accessible and the station remotely configurable. Just add sensors.


  • All-in-one integrated system for quick, reliable deployments.

  • Weatherproof packaging for deployment in harsh environments. Quick-connect military-style connectors

  • Supports SDI-12, analog, and pulse sensors, providing flexible deployment options.

  • Integrated cellular transceiver with intelligent network connection management ensures low-power, extremely reliable data acquisition.

  • Data logged locally on an SD flash storage card as redundant backup.

  • Pre-provisioned for instant cellular network connection and simple, reliable setup (use user-supplied SIM cards outside North America).

  • One year subscription to CloudInsight cloud-based hub software included.


Specifications

General
Data Storage Removable 2 GB SD memory card (FAT 32)
Non-volatile memory All setup parameters
Logging interval 1 second to 24 hours (sensor dependent)
Reporting interval 2 minutes to 24 hours
Cellular communications Dual band CDMA 800, 1900 MHz
Penta-Band HSPA+
GSM Quad band 850, 900, 1800, 1900 MHz
UMTS/HSPA Penta Band 850, 900, 1700, 1900, 2100 MHz
EGPRS / WCDMA / HSDPA / HSUPA Protocol Stack
Current Consumption
Listen/trigger mode/idle <2mA
Data receive / store /
prepare for transmission
150 mA
Data transmit 250 mA
Power
Battery 10Ah Li-ion included. Optional external battery.
TX output power 24.3 dBm (270 mW)
Solar panel 5W, 12V
Sensor Input
Analog input 4 analog channels, single-ended
Input type: 2 wire, 0–2.5 V or 4-20 mA current loop
Sensor power: 24 VDC switched (under firmware control)
Analog to digital (0-2.5 VDC): 21-bit resolution
Pulse input 2 pulse channels
Continuity or TTL: 0 V to 2.2 V - 5 V
Maximum rate: 10 pulses per second
SDI12 Input Number of sensors: up to 10 sensors
Sensor power: 12 VDC switched or constant during measurement
Environmental
Environmental sealing IP65
Operating temperature -20°C to 75°C (-4°F to 167°F).
Battery won’t charge below 0°C (external battery options available for colder conditions)
Storage temperature -40°C to 75°C (-40°F to 167°F with extended temperature option)
Lightning protection AC transient voltage suppressor (TVS) on each sensor port input
Physical
Dimensions (H x L x W) 4.1 cm (1.6”) x 17.0 cm (6.7”) x 12.2 cm (4.8”)
Weight 10.78 oz (305.6 g)
Warranty 1 year limited parts and labour

FAQs

 

How do I access the data captured by Xo?
Xo provides one year of usage of our hosted software CloudInsight, which can be used to view current and historical data (either the raw data or a graphical chart), perform data processing like corrections or computations, trigger alarms, and a range of other functions. With it you can export your data to CSV or Excel format, or have it forwarded to another location via FTP or HTTP.

Is everything really included?
Xo is a complete system. Here are the components required to measure data in a remote location autonomously and record the data so it can be accessed and turned into insightful information that one can make decisions with:

  • Cellular modem – GSM or CDMA.
  • Data logger – although it’s not your typical complex, power-hungry, expensive data logger. Instead, it’s more like a “virtual data logger”, as all data is forwarded to a cloud storage location after it’s captured. As a backup, it’s also logged locally in the hardware (on a removable SD card, also included), but you’ll appreciate the easy access to the cloud-based data it provides.
  • Power – An internal 10Ah battery, with the option of a larger external battery as well if needed (in most cases you won’t need it). A small solar panel is also included to recharge the battery.
  • Solar charge regulator and power manager.
  • Cellular service – (North America only). The service is already provisioned for you, so there’s nothing you need to do. Outside of North America, you’ll need to set up your own cellular service, but once you do that, all you do is remove the top of the unit (4 screws) and insert a SIM card.
  • Cellular antenna – there’s an antenna integrated into the unit, or if the unit will be placed in a location where cellular signal is weak, you can order Xo with an external high-gain antenna.
  • Software to access data. We provide one year of access to our hosted CloudInsight software. Usage after the first year is charged on a yearly basis. If you don’t want to continue paying, you can continue to use CloudInsight in order to configure your remote Xo station and forward data to another location to view and manipulate the data in a different application, but all other features will no longer be available.

Xo does NOT include any support structure (like a tripod, tower or pole) but it includes hardware for mounting to a pole up to 10cm (4″) in diameter. It also does not include any sensors.

Do I need to install software on my laptop to configure sensors or download data in the field?
No, all configuration of your sensors is done online through the web-based CloudInsight software. This means that you can interact with your sensors anywhere you have an internet connection, using any device, from a smartphone to a laptop. Data does not need to be downloaded, as it is also accessible anywhere through the same cloud-based software.

How difficult is it to set up Xo?
Setting up a remote Xo-based station is one of the greatest benefits of an all-in-one system. There are just three simple steps:

  1. Plug in the solar panel.
  2. Plug in the sensor(s).
  3. Configure how and when you want to collect data, where to send it, data post-processing and alerts, with the web-based CloudInsight software.

The one caveat is that your sensors need to have the Xo quick connectors on the end to be able to plug in. Fortunately, Xo quick connectors are inexpensive and super easy to install, even in the field.

How many sensors can I connect to Xo?
Up to 10 SDI-12, up to 4 analog (0-2.5 V or 4-20 mA) or up to 2 pulse sensors can be connected. The number of sensors that can be connected is limited only by the total power load.

Can I use my existing sensors?
Absolutely. You just need to install Xo quick connectors, which is easy to do.

How much data can be transferred through Xo?
Up to 25MB of data can be transferred through Xo per month. If, in the unlikely event that, more than 25MB of data is collected during a monthly period, an alert will be sent to the administrator account, and you may be charged $2.00 per MB for all data consumed over this limit.

Is there a limit to how much data can be stored in CloudInsight or the number of user accounts that can be created?
There is no limit for either the amount of data that can be stored nor the number of user accounts that you can create for CloudInsight.

Is it possible to see a demo of the CloudInsight software before buying Xo?
Absolutely. Please contact us at sales@gropoint.com or 250-412-6642 and we’d be glad to give you a live demonstration using GoToMeeting.

Does the Xo unit need to be placed inside a weatherproof enclosure, or can it by left exposed to the elements?
Xo is designed to be placed outside and not in another enclosure. The enclosure is rated IP65, which means “rated as dust tight and protected against water projected from a nozzle”. For all intents and purposes, Xo should be fine when not in an enclosure, but if you are concerned about water intrusion or potential submersion, then you can certainly place it in another enclosure, but you’ll require an external antenna, as the integrated antenna’s signal most likely won’t properly penetrate an additional enclosure layer.

Can I use Xo to capture remote photos or video?
No, Xo can only be used to capture, log and transmit standard ASCII data from sensors.

 

Downloads

Datasheets

Documentation

Inquire

Related Products

Sensor Connector For Xo
$0.00

User-installable connectors can be used to adapt any sensors to plug in to Xo.

Quantity:
Add To Cart
Titan/Orbit External Omnidirectional Antenna
$160.00

3 dBi gain, omnidirectional, fibreglass antenna for use with cellular (Xo) and LPWAN (Radius) products. Includes mounting hardware to secure to poles up to 4″ in diameter.

Quantity:
Add To Cart

Xo reduces complexity & increases reliability.

XO WORKS GREAT WITH GROPOINT SENSORS, OR USE ANY OTHER SDI-12 OR ANALOG SENSOR.

Pole not included. 

File 58.png

 ORBIT XO FEATURES:

  • Simple setup: Everything is included except your sensors. 3 simple steps to set up a station in minutes:

1. Connect solar panel.
2. Connect sensors.
3. Configure how and when you want to collect data, where to send it, data post- processing and alerts, with a simple web app.

  • No data logger required: Data is collected and automatically forwarded to secure cloud storage for retrieval or processing.

  • Sensor-agnostic: Regardless of the manufacturer, your sensors are fully compatible. Field-installable connectors can be used adapt your existing sensors.

  • Ultimate flexibility: Up to 10 SDI-12, up to 4 analog (0-2.5 V or 4-20 mA) or up to 2 pulse sensors can be connected. The number of sensors that can be connected is limited only by the total power load.

  • All-in-one means software is included, too: For logging, analysis, reporting, and storage of data from remote monitoring locations, Xo includes a one year subscription to CloudInsight (yearly plans available for purchase thereafter). It stores and analyzes your data, notifies your smartphone when conditions are met, allows you to visually create custom calculations and “virtual sensors”, and it can receive and/or forward data from/to 3rd-party systems.

GP-DarkGreen-02.png

 

CloudInsight Turns Data Into Actionable Information

DATA PROCESSING FOR IRRIGATION INSIGHT

  • Insert saturation and stress markers

  • Mark irrigation or water events

  • Track rainfall and water events

  • Create your own ag index

  • Build a growing degree day “virtual” sensor by combining data from multiple real sensors and applying a calculation.

 
 

With CloudInsight, you can:

  • Plot data from segments at each depth of a GroPoint Profile to determine optimal irrigation to penetrate the bottom of the root zone.

  • The web-based CloudInsight data hub is incredibly powerful and intuitive. It’s used to configure all aspects of the station including logging and reporting intervals, and all analog, pulse and SD-12 sensors. Make changes at any time, from any device.

  • Easily locate and access current and historical data, and configuration of all stations and sensors.

  • Send alarms (email or SMS) when a parameter reaches a threshold or changes by at least a specified value over a period of time. Parameters can be measured by sensors or “virtual” (computed based on one or multiple sensors with a formula applied).

CloudInsight Features:

  • Unified data interface experience: Sensor configuration, data storage, custom algebraic equations, custom data formats and forwarding, control, analysis, alarm notifications (email, SMS), reporting and actions all done with one simple cloud-based user interface.

  • Security: Three user access levels for configuration, data management interface and visualization. Optional data encryption available.

  • Redundancy: All data is saved locally on an SD storage card, and once in the cloud is replicated on a redundant data server and backed up nightly.

  • Connection verification: Xo verifies connection with cell network and server connection before data is sent. If no connection is available or if data reception is not confirmed, data is saved and sent the next scheduled transmission.

  • Direct data access options: Third-party programs can access data using REST API or HTTP post.

  • Custom calculations and data transformations: Use the visual formula builder to create simple to complex math functions using any sensor data as variables. Create a “virtual sensor” from this data to create new graphs or serve as inputs to other calculations.

  • Drag-and-drop customizable dashboard: Configure what data to show and how with dashboard widgets. Place them where you want and stretch to resize. Choose high-visibility single data values, line graphs, bar charts, fuel-gauge style graphs, or 360° directional graphs, for any parameter.

  • Automated updates: Updates to firmware and cloud- based application can be automatically installed.

GP-DarkGreen-02.png