Titan Radius Repeater
SDI-12 Wireless LPWAN Network Extender
Connects directly to SDI-12 sensors (up to 10 per Mote).
Motes connect to a Gateway, or to Repeaters, to extend their range.
Overview
The Radius Repeater uses unlicensed wireless spectrum to extend the range of a Radius Mote so it can be located up to 15km farther away from a central Radius Gateway.
Radius networks incorporate advanced low power, long range wireless technologies with proprietary mechanical engineering, power management and power supply to eliminate the need for expensive supporting infrastructure (large batteries, solar panels, enclosures, cables). By eliminating this infrastructure as well as the need for a data logger and communications uplink at each sensor site, the cost of the entire sensor network is reduced dramatically.
Create a Seamless, Low-Power, Wide-Area Wireless Network (LPWAN) for SDI-12 Sensors
All-in-one: Integrated radio, battery, power management, enclosure, mounting bracket—nothing else required.
Automatic: devices self-configure and form a wireless network automatically.
Simple: works out of the box. No tools required to install.
Extremely low power consumption: solar panel generally not needed, lasts for years without needing recharging.
Durable: IP67/IP68 rating for reliable long-term deployments in harsh environments.
Scalable: Up to 10 sensors per Mote/slave, 6 Motes/slaves per repeater, 3 repeaters per network.
Specifications
| Communications | |
|---|---|
| Range | Up to 15 km (9.3 miles). Signals can penetrate certain foliage, buildings and obstructions. Range depends on antenna height/type and obstacles in path of line of sight. |
| Wireless frequency | 915 and 868 MHz certified, 860‐930 MHz frequency range |
| Sensors | |
| Maximum number of sensors |
10 |
| Sensor power | 12VDC switched, during measure‐ ment |
| Maximum output current | 138 mA (12V), up to 500 mA pulse (12V) with capacitor battery option (available 2018-Q3) |
| Sensor protocol | SDI‐12, v.1.3 |
| On-board sensors | Temperature sensor for optimizing power management and battery charging in cold operations. |
| Electrical | |
| Current consumption | Listen/idle: 300 μA Data transmit: 128 mA Stop/idle: 1.65 μA |
| Input voltage | 10‐18V, reverse polarity protected. |
| Internal battery options | Primary: 8.6Ah ‐ 38Ah, 3.6V Secondary: 10Ah Li‐ion rechargeable Custom option: Hybrid |
| TX output power | 128 mA |
| Optional external battery pack | 10‐18V |
| Environmental | |
| Operating temperature | -40°C to 75°C |
| Storage temperature | -40°C to 75°C |
| Physical | |
| LED indicators | RSSI, sensor, battery, operating status |
| Weight (excluding battery) | 12.8 oz (400g) |
| Weight (including full battery configuration) | 19.2 oz (600g) |
| Warm-up time | 30s |
| External antenna | Wip antenna, high-gain omnidirectional |
| Security | 128 bit AES encryption |
FAQs
No FAQs currently.
Downloads
Datasheets
Documentation
Inquire
Related Products
Titan Radius Mote
SDI-12 Wireless LPWAN Slave (long-range wireless bridge/cable replacement).
Titan Radius Gateway
SDI-12 Wireless LPWAN Master (connects up to 25 slave units).
Titan/Orbit External Omnidirectional Antenna
CA$160.00
3 dBi gain, omnidirectional, fibreglass antenna for use with cellular (Xo) and LPWAN (Radius) products. Includes mounting hardware to secure to poles up to 4″ in diameter.
Quantity:
The Radius LPWAN Network
Each Mote/slave provides a wireless SDI‐12 LPWAN bridge between a sensor and a Radius Gateway (which connects to data logger or uplink) or a Radius Repeater (extends the network even farther).
